• Free shipping on orders over €5000 in AT

  • Consulting and Planning

  • Fast shipping

  • Current Daily Rates

ELTAKO  Art.Nr: 15472881238347

ELTAKO Power Relay. 1 changeover contact potential-free 16 A/250V AC – 22001130

Regular price
Regular price € 62,65 inkl. USt.
€ 52,21 exkl. USt.
Verfügbarkeit wird geladen …
WhatsApp Sofortberatung Jetzt online Persönliche Beratung direkt vom Fachmann – Antwort meist in wenigen Minuten.

1 potential-free NO contact 16A/250V AC. 230V LED lamps up to 200W, incandescent lamps 2300W. Stand-by loss only 0.8 watts. Modular device for mounting on DIN-EN 60715 TH35 mounting rail. 1 module = 18mm wide, 58mm deep. With the patented ELTAKO Duplex technology (DX), the normally potential-free contacts can still switch at zero crossing when switching 230V AC 50Hz, thereby drastically reducing wear. To do this, simply connect the N conductor to terminal (N) and L to 1(L). This results in an additional stand-by loss of only 0.1 watt. If the contact is used to control switching devices that do not switch at zero crossing themselves, (N) should not be connected, as the additional closing delay would otherwise have the opposite effect. An internal toroidal current transformer compares the alternating current flowing through a consumer V1 from 0.1A to a maximum of 32A with the set value. If the value is exceeded, a relay switches off a consumer V2 connected to 2 or switches on a consumer V3 connected to 3 within 0.5 seconds. Setting accuracy ±5%. From 25A, the relay always switches on. State-of-the-art hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. The current base A is set with the lower detented rotary switch A. The following base values are available: 0.1A, 0.3A, 0.6A, 0.9A, 1.5A, 1.9A, 3.0A and 3.2A. The multiplier xA is set with the middle detented rotary switch xA and is between 1 and 10. This allows currents from 0.1A (current base 0.1A and multiplier 1) to be set. The fallback delay RV can be set between 0 and 120 seconds with the upper detented rotary switch RV. The hysteresis is fixed at approx. 25%. Switching state indicator with LED. The measuring input M1-M2 is galvanically isolated from the power supply L-N and the normally open contact 1(L)-2/3. Reference values greater than 32A can be adjusted via an external current transformer.

Installation anfragen
Montage • Elektro • Inbetriebnahme
Wir bieten die Installation deiner Photovoltaikanlage durch unser Team sowie durch ausgewählte Partnerbetriebe an. Gemeinsam sorgen wir für eine fachgerechte Montage, Elektroinstallation und zuverlässige Inbetriebnahme.
Installation anfragen
Datenblatt
Hinweis: Der Link kann je nach Hersteller direkt einen Download starten.
Öffnen / Download

Technische Parameter

Produkteigenschaften ETIM

Ursprungsland
CN
Zolltarifnummer
85364900
eClass
27144076
eClass Bezeichnung
Ersatzteil für Installationsschalterprogramme
Serien
Überwachungsrelais
ETIM-Klasse
Stromüberwachungsgerät
Ausführung des elektrischen Anschlusses
Schraubanschluss
Mit abnehmbaren Klemmen
Nein
Externe Stromversorgung erforderlich
Nein
Spannungsart der Versorgungsspannung
AC
Versorgungsspannung AC 50 Hz
230 - 230 V
Spannungsmessbereich
230 - 230 V
Stromart
AC
Strommessbereich
0.1 - 32 A
Bemessungssteuerspeisespannung AC 50 Hz
250 - 250 V
1-Phasen-Unterstrom möglich
Nein
3-Phasen-Unterstrom möglich
Nein
1-Phasen-Überstrom möglich
Nein
Spannungsart zur Betätigung
AC
3-Phasen-Überstrom möglich
Nein
1-Phasen-Fenster möglich
Nein
3-Phasen-Fenster möglich
Nein
Enthält Funktion Gleichspannung-Unterstrom
Nein
Enthält Funktion Gleichspannung-Überstrom
Nein
Funktion Gleichstrom-Fenster
Nein
Min. einstellbare Rückfallverzögerungszeit
0 s
Max. zulässige Rückfallverzögerungszeit
120 s
Externer Stromwandler
Nein
Anzahl der Kontakte als Öffner
0
Anzahl der Kontakte als Schließer
0
Anzahl der Kontakte als Wechsler
1
Spannungsart der Betriebsspannung
AC
Betriebsspannung AC 50 Hz
230 - 230 V
Betriebsspannung DC
230 - 230 V
Bemessungsschaltstrom
16 A
Breite
18 mm
Höhe
58 mm
Tiefe
58 mm