• Free shipping on orders over €5000 in AT

  • Consulting and Planning

  • Fast shipping

  • Current Daily Rates

ELTAKO  Art.Nr: 15473152098635

ELTAKO Wireless Actuator Multifunction Latching Relay 230V. 1+1 N/O contact not potential-free 10 – 30200330

Regular price
Regular price € 103,97 inkl. USt.
€ 86,64 exkl. USt.
Verfügbarkeit wird geladen …
WhatsApp Sofortberatung Jetzt online Persönliche Beratung direkt vom Fachmann – Antwort meist in wenigen Minuten.

1+1 N.O. contacts, not potential-free 10A/250V AC, 230V LED lamps up to 400W, incandescent lamps 2000 watts. Encrypted wireless, bidirectional wireless, and repeater function selectable. Standby loss only 0.8 watts. For flush-mounted installation. 45mm long, 45mm wide, 33mm deep. Local supply, switching, and control voltage 230V. In case of power failure, the switching state is maintained. When the power supply returns, it is definitively switched off. This wireless actuator, as a multifunctional impulse switch, features the most modern hybrid technology developed by us: We have combined the wear-free reception and evaluation electronics with two bistable relays switching at zero crossing. This eliminates coil power loss and heating even when switched on. After installation, wait for the short automatic synchronization before connecting the switched load to the mains. In addition to the wireless control input via an internal antenna, this multifunctional impulse switch can also be locally controlled with a conventional 230V control button, if installed upstream. In the 2xS function, only contact 1. Maximum current as a sum over both contacts 16A at 230V. Encrypted sensors can be taught-in. Bidirectional radio and/or a repeater function can be switched on. Every change of state as well as incoming central control telegrams are then confirmed with a radio telegram. This radio telegram can be taught into other actuators and controllers. With the upper rotary switch, up to 35 wireless buttons are assigned in the LRN position, including one or more central control buttons. After that, the desired function of this multifunctional impulse switch is selected. The changeover is visualized by the LED flashing. 2xS = 2-channel impulse switch with 1 N.O. contact each. 2S = Impulse switch with 2 N.O. contacts. WS = Impulse switch with 1 N.O. contact and 1 N.C. contact. SS1 = Series switch 1 + 1 N.O. contact with switching sequence 1. SS2 = Series switch 1 + 1 N.O. contact with switching sequence 2. Switching sequence SS1: 0 - Contact 1 - Contact 2 - Contacts 1 + 2. Switching sequence SS2: 0 - Contact 1 - Contacts 1 + 2 - Contact 2. The lower rotary switch is only needed for teaching in the transmitters. From production week 08/2013, universal buttons and direction buttons can be taught-in. The LED accompanies the teaching-in process according to the operating instructions and indicates wireless control commands during operation by briefly flashing.

Installation anfragen
Montage • Elektro • Inbetriebnahme
Wir bieten die Installation deiner Photovoltaikanlage durch unser Team sowie durch ausgewählte Partnerbetriebe an. Gemeinsam sorgen wir für eine fachgerechte Montage, Elektroinstallation und zuverlässige Inbetriebnahme.
Installation anfragen
Datenblatt
Hinweis: Der Link kann je nach Hersteller direkt einen Download starten.
Öffnen / Download

Technische Parameter

Produkteigenschaften ETIM

Ursprungsland
CN
Zolltarifnummer
85365080
eClass
27144000
eClass Bezeichnung
Installationsschalterprogramm
Serien
Smarte Aktoren+Sensoren+Controller
ETIM-Klasse
Funkempfänger
Geeignet für Dimmer
Nein
Geeignet für Pulsdrücker
Ja
Geeignet für Rollladenschalter
Nein
Geeignet für Jalousieschalter
Nein
Geeignet für Jalousie-/Rollladenschalter
Nein
Geeignet für Schalter
Ja
Im Gehäuse
Ja
Im Röhrensockelgehäuse
Nein
Als Modul/Platine
Nein
Stromversorgung
230 V AC
Leistungsaufnahme
0.8 W
Tast-Betrieb
Ja
Schalt-Betrieb
Ja
Mit Funkhandsender
Nein
Mit Funkcodiergerät
Nein
Mit Funktaster
Nein
Anzahl der Relais
2
Montageart
Unterputz
Werkstoff
Kunststoff
Werkstoffgüte
Thermoplast
Halogenfrei
Ja
Oberflächenschutz
sonstige
Ausführung der Oberfläche
matt
Befestigungsart
sonstige
Farbe
blau
Transparent
Nein
Geeignet für Schutzart (IP)
IP20
Funkfrequenz
868 MHz
Rollingcode-System
Ja
Anzahl der Befehle
32
Kompatibel mit Apple HomeKit
Nein
Kompatibel mit Google Assistant
Nein
Kompatibel mit Amazon Alexa
Nein
IFTTT-Unterstützung verfügbar
Nein