{"product_id":"wilo-wilo-smart-pumpe-stratos-maxo-d-32-0-5-12-pn6-10-de-2186225-verkaufseinheit-1-stuck","title":"WILO Wilo Smart Pump Stratos MAXO-D 32\/0.5-12 PN6\/10 (DE) – 2186225","description":"\u003cp\u003ePremium Smart Pump Wilo-Stratos MAXO-DH\nHigh-efficiency inline glandless twin pump with EC motor and electronic power adjustment. Can be used for heating water, cold water, and water-glycol mixtures. Energy efficiency index (EEI) between ≤ 0.17 and ≤ 0.19 depending on the pump type.\nControl modes:\nPermanent, automatic power adjustment to system requirements without setpoint specification Wilo-Dynamic Adapt plus (factory setting). Up to 20% energy saving compared to dp-v control mode.\nConstant temperature (T-const.)\nConstant differential temperature (dT-const.)\nDemand-driven volume flow optimisation of the feeder pump through networking and communication with multiple pumps (Multi-Flow Adaptation).\nConstant volume flow (Q-const.)\nDifferential pressure control dp-c at a remote point in the pipe network (worst point control)\nConstant differential pressure (dp-c)\nVariable differential pressure (dp-v) with the option of nominal operating point input\nConstant speed (n-const.)\nUser-defined PID control\nFunctions:\nHeat quantity acquisition\nCooling quantity acquisition\nAutomatic pump shut-off upon zero-flow detection (No-Flow Stop)\nSwitching between heating and cooling operation (automatic, external or manual)\nAdjustable volume flow limitation by Q-Limit function (Qmin. and Qmax.)\nTwin pump operating modes: Efficiency-optimized additive operation for dp-c and dp-v, main\/standby operation\nSave and restore configured pump settings (3 restore points)\nFault message\/warning message display in plain text including recommended remedies\nVentilation function for automatic venting of the rotor chamber\nAutomatic night setback\nAutomatic deblocking function and integrated full motor protection\nDry-running detection\nDisplay:\nControl mode\nSetpoint\nVolume flow\nTemperature\nPower consumption\nElectrical consumption\nActive influences (e.g. STOP, No-Flow Stop)\nDesign:\n2 configurable analog inputs: 0-10 V, 2-10 V, 0-20 mA, 4-20 mA and commercial Pt1000; power supply with +24 V DC\n2 configurable digital inputs (Ext. OFF, Ext. Min, Ext. Max, Heating\/Cooling, Manual Override (building automation disconnected), Operation Lock (keypad lock and remote control configuration protection))\n2 configurable signal relays for operation and fault messages\nSlot for Wilo-CIF modules with interfaces for building automation BA (Optional accessories: CIF modules Modbus RTU, Modbus TCP, BACnet MS\/TP, BACnet IP, LON, PLR, CANopen)\nWilo Net as Wilo system bus for communication between Wilo products, e.g. Multi-Flow Adaptation; twin pump operation and Wilo-Smart Gateway\nIntegrated temperature sensor\nAutomatic emergency operation in special conditions (pump speed definable) e.g. in case of bus communication failure or sensor value failure\nGraphical color display (4.3 inches) with operation via single-button manual control level\nReading and setting operating data and e.g. creating a commissioning report via Bluetooth interface (without additional accessories) using the Wilo Assistant App\nTwin pump management integrated (twin pumps are pre-wired), when using 2 single pumps as a twin pump unit, connection via WILO Net\nCable break detection for analog signal (in conjunction with 2-10 V or 4-20 mA)\nOutdoor installation with weather protection possible according to installation and operating instructions\nDate and time preset\n5 years warranty\nScope of delivery\nPump\n2x Optimized Wilo-Connector for all sizes\n4x cable glands M16 x 1.5\nWashers for flange screws M12 and M16 (for connection nominal widths DN 32 to DN 65)\n2x seals for threaded connection\nInstallation and operating instructions (digital)\nOptional accessories:\nCIF module: Modbus TCP, Modbus RTU, BACnet IP, BACnet MS\/TP, LON, PLR, CANopen\nPt1000 (B) pipe clamp sensor (for domestic hot water)\nPt1000 (AA) sensor for installation in immersion sleeve\nDifferential pressure sensor\nOperating data\nFluid: Water, ethylene glycol, propylene glycol\nMin. fluid temperature: -10 °C\nMax. fluid temperature: 110 °C\nMin. ambient temperature: -10 °C\nMax. ambient temperature: 40 °C\nMaximum operating pressure: 10 bar\nMinimum inlet head at 50°C: 3 m\nMinimum inlet head at 95°C: 10 m\nMinimum inlet head at 110°C: 16 m\nMotor data\nEnergy efficiency index (EEI): 0.19\nMains connection: 1~230 V ±10%, 50\/60 Hz\nCurrent (min): 0.11 A\nCurrent (max): 1.42 A\nMotor rated power: 266 W\nSpeed min.: 750 rpm\nSpeed max.: 4400 rpm\nPower consumption: 7 W\nPower consumption: 320 W\nEmissions: EN 61800-3;2004+A1;2012 \/ Residential (C1)\nImmunity: EN 61800-3;2004+A1;2012 \/ Industrial (C2)\nInsulation class: F\nProtection class: IPX4D\nCable gland: 5 x M16x1.5\nMaterials\nPump housing: Cast iron\nImpeller: PPS-GF40\nShaft: 1.4122, DLC-coated\nBearings: Carbon, antimony-impregnated\nInstallation dimensions\nSuction side pipe connection: DN 32\nPressure side pipe connection: DN 32\nInstallation length: 220 mm\nOrdering information\nManufacturer: Wilo\nNet weight approx.: 21 kg\nArticle number: 2186225\u003c\/p\u003e","brand":"WILO","offers":[{"title":"Default Title","offer_id":56294506692939,"sku":"WIL2186225","price":4152.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/5075\/6427\/files\/8223ba36fc97ffc4aa34554fe80a3db2.webp?v=1768552930","url":"https:\/\/sularvic.com\/en\/products\/wilo-wilo-smart-pumpe-stratos-maxo-d-32-0-5-12-pn6-10-de-2186225-verkaufseinheit-1-stuck","provider":"SOLARVIC | Photovoltaik \u0026 Haustechnik","version":"1.0","type":"link"}