• Free shipping on orders over €5000 in AT

  • Consulting and Planning

  • Fast shipping

  • Current Daily Rates

WILO  Art.Nr: 15472159261003

WILO Wilo DrainLift Sewage Lifting Unit SANI-L.12/T540/1-CEE – 6098842

Regular price
Regular price € 7.021,53 inkl. USt.
€ 5.851,28 exkl. USt.
Verfügbarkeit wird geladen …
WhatsApp Sofortberatung Jetzt online Persönliche Beratung direkt vom Fachmann – Antwort meist in wenigen Minuten.

Compact, ready-to-connect, fully submersible twin-pump lifting station for pumping wastewater containing faeces.Conveyed mediaFor the collection and pumping of the following media in commercial zones:Wastewater containing faecesWastewater without faecesWastewater pumping in accordance with EN 12050The lifting station complies with DIN EN 12050-1.ConstructionGas- and watertight collection tank:Sloping bottomInspection opening with transparent coverFreely selectable inlets in the indicated areasLevel measurement with 4 – 20 mA level sensorWastewater pump:Mounted directly on the collection tankMotor with surface cooling (air cooling) and thermal motor monitoringPressure connection with non-return valve and attached inspection openingPre-wired control unit for automatic operation:Collective fault signal via potential-free contactIntegrated and mains-independent alarmAdjustable overrun timeConnection cable 1.5 m with pre-assembled plugScope of deliveryLifting station with control unit and connection cable with plugFlange connection from DN 80, PN 10 to DN/OD 110Flexible sleeve DN/OD 110 for drain connectionHT double socket DN/OD 75 for ventilation connectionHT double socket DN/OD 50 for emptying connectionInlet set with hole saw 124 mm (5 inches) and seal for HT pipe DN/OD 110Floor mounting setSound insulation mat9 V batteryInstallation and operating instructionsOperating dataFluid media: WaterPermissible area of applicationFluid temperature: 3 °CMax. fluid temperature, for short periods of up to 5 min.: 65 °CAmbient temperature: 3 °CMaximum operating pressure: 3 barMax. permissible pressure in the pressure line: 1.5 barProduct dataGross volume of tank: 122 lUsable volume with 180 mm inlet height: 60.00 lUsable volume with 250 mm inlet height: 76.00 lUsable volume with 315 mm inlet height: 91.00 lSound pressure level: 70 dBOperating mode (submerged): S3-10%Height: 571 mmLength: 852 mmWidth: 635 mmDiagonal dimension: 965 mmFree ball passage of hydraulics: 44 mmMotor dataMains connection: 3~400 V, 50 HzVoltage tolerance: ±10 %Motor rated power: 1100 WRated speed: 2865 rpmRated current: 4 AInsulation class: FMotor protection class: IP68Type of cutting: Direct (DOL)Max. switching frequency: 60 Operating mode per pump: S3-10%Motor protection: BimetallicCableLength of connection cable: 4 mCable type: H07RN-FCable cross-section: 6G1 mm²Mains plug: CEE 16A, 3P+N+PE, 6hMaterialsTank: PEPump casing: PP-GF30Impeller: PP-GF30Shaft: Stainless steelSeal material: NBRMotor housing: Stainless steelInstallation dimensionsSuction side pipe connection: DN/OD 110 (HT pipe), DN/OD 160 (HT pipe)Pressure side pipe connection: DN 80Ventilation connection: DN/OD 75 (HT pipe)Ordering informationMake: WiloProduct designation: DrainLift SANI-L.12/T540/1-CEENet weight approx.: 67 kgPart number: 6098842

Installation anfragen
Montage • Elektro • Inbetriebnahme
Wir bieten die Installation deiner Photovoltaikanlage durch unser Team sowie durch ausgewählte Partnerbetriebe an. Gemeinsam sorgen wir für eine fachgerechte Montage, Elektroinstallation und zuverlässige Inbetriebnahme.
Installation anfragen

Technische Parameter

Produkteigenschaften ETIM

Ursprungsland
DE
Zolltarifnummer
84137021
eClass
22361311
eClass Bezeichnung
Haltegriff (Bad)
ETIM-Klasse
Abwasserhebeanlage
Mit Schneidwerk
Nein
Werkstoff des Pumpengehäuses
Polypropylen (PP)
Werkstoffgüte des Pumpengehäuses
PP-GF
Werkstoff des Gebläserads/Laufrads
Polypropylen (PP)
Werkstoffgüte Gebläserad/Laufrad
PP-GF
Werkstoff des Behälters
sonstige
Werkstoffgüte des Behälters
PE-40
Behältervolumen
122 l
Anzahl der Pumpen
2
Volumenstrom (BEP)
15.93 m³/h
Förderhöhe bei Volumenstrom (BEP)
75.12 kPa
Max. Volumenstrom
32.4 m³/h
Max. Förderhöhe
12.12 m
Max. Arbeitsdruck
3 bar
Elektrischer Anschluss
Anschlusskabel mit Stecker
Bemessungsspannung
400 - 400 V
Anzahl der Phasen
3
Frequenz
50 Hz
Nennstrom
4 A
Aufgenommene Motorleistung (P1) pro Motor
1.56 kW
Motorausgangsleistung (P2)
1.1 kW
Nennbetriebsart
S3 10 %
Isolationsklasse nach IEC
F
Drehzahl
2865 1/min
Mediumtemperatur (Dauerbetrieb)
3 - 40 °C
Umgebungstemperatur
3 - 40 °C
Anschluss Einlassseite
sonstige
Anschluss Auslassseite
Flansch
Nenndurchmesser, Anschluss Auslassseite
DN 80
Rohraußendurchmesser, Anschluss Auslassseite
80 mm
Druckstufe Flanschanschluss Auslassseite
PN 10
Anschlussstandard Auslassseite
EN 1092-2
Schutzart (IP)
IP68
Breite
635 mm
Tiefe
852 mm
Höhe
571 mm
Max. Partikelgröße
44 mm